Should you show the asking rent on commercial listings? Yes: print a rate or a range, with the unit and the lease type beside it, and keep "call for details" for the questions that really do depend on the tenant. A person looking at space on a phone wants to know in ten seconds whether it is anywhere near their budget.
We looked at how many broker sites do. On November 9, 2026 we read 76 lease listings on five Sacramento-area commercial brokerage sites. Only 21 showed a rent for the space, and 18 of those came from one site.
A rent for the space
A rent for one suite only, the rest "contact broker"
"Contact broker", "see details" or nothing
| What the 76 lease listings showed | Listings |
|---|---|
| A rent for the space | 21 |
| A rent for one suite only, the rest "contact broker" | 1 |
| "Contact broker", "see details" or nothing | 54 |
We build websites for commercial brokerages, so weigh this accordingly. The sample, the method and what we could not read are at the end, and no firm is named.
Who shows the asking rent on commercial listings, and who does not
We started from the same 21 Sacramento-area brokerage sites as our flyer PDF post. Nine of them list properties with a number on them somewhere. We read lease listings on five of them, and those five split like this (two more sites' lease listings we could not read, and one site's lease side was outside what we read):
- One site printed a rate on 18 of 19 lease listings. Every one read "sf/yr", some as a range ("$11.88 to $15.00 sf/yr"). The other said "Negotiable". The list never said whether the rate was NNN or gross.
- One site listed 47 properties and 36 of them were for lease. Two showed a rent, one showed a rent for a single suite, and 29 said "Contact Broker for Price". The four "for sale or lease" listings said "See Details for Price".
- One site had 19 properties with space for lease and not one printed a rent. The only dollar amounts on its 41 property pages were four prices for land for sale.
- One site had a single lease listing with a rate and no period. It read "$2.00/SF" for a 65,500 SF office building. Is that per month or per year? A tenant cannot tell from the listing, and the availability date on it was November 2020.
- One site had a single lease listing with no rent ("Available on flexible terms").
Sale prices are a different story. On the sites that list properties for sale, the price was almost always there: five of five on one, three of three on another, and nine of the ten active listings on a third. For sale, the price is the headline. For lease, it mostly is not.
We could not read two sites' listings at all (their listing platform's widget did not load for us), so they are in neither count.
Why brokers hold the rent back
Two reasons come up in what we read, and the first has something real to it.
- The rate depends on the tenant. Credit, term, size, free rent and the improvements a landlord will pay for all move the number, so one printed figure can look like a promise. One tenant representation brokerage (CroninCRE, undated page) says brokers usually explain it by saying they do not know the improvement costs for any one tenant, then argues that is not a good reason, since other landlords quote a rate anyway.
- Landlords may not want the market to see the number. Another tenant representation firm says some owners publish rents that have not moved in years, or write "withheld" or "negotiable" so the real market stays hidden (quoted below). That is one firm's view of one market, not something we measured.
Weigh what you read here: nearly everything published on this question comes from tenant representation firms, who earn their living from tenants who are shopping. They are the ones most likely to say withholding a rent hurts the tenant. Their advice to a tenant who finds no rent is to call anyway and put a proposal in writing.
What tenant reps say about it
All of these are firms with something to sell, and all are opinions, not measurements.
- CroninCRE (a Bay Area tenant representation firm, undated): "It's good to know if you are looking to spend $50/RSF/YR, that you aren't touring and considering $70/RSF/YR space. That saves everyone time." The same page says that in the firm's experience about 90 percent of spaces have asking rates.
- Hughes Marino (a national tenant representation firm, February 10, 2026): landlords and brokers are "publishing asking rents that haven't changed materially since 2023, or not posting rents at all with listing asking prices shown as "withheld" or "negotiable."" That is the firm's view of the industrial market.
- Noah & Co (a New York office tenant representation firm, August 31, 2026): "A landlord's published asking rent reflects what they want the market to believe, not what they'll accept."
Read together, the lesson for you is narrow. A tenant already treats an asking rent as the start of a negotiation, so showing one does not lock you in. And a tenant who finds "contact broker" next to every listing has to make a call to learn what a competing listing already answers on the page.
What we could not find
We found no current, independent study that compared inquiries on listings with a rent and without one. One data platform (Realmo, which runs an AI assistant on its listing pages, in an article on The Investor's Podcast Network) published an analysis of questions its assistant received on retail listings between May and July 2026. In it, lease-structure questions were 7 percent of the retail questions it examined, and its advice was to "make clear whether the quoted rate is NNN (Triple Net Lease), modified gross, or full service." That is a vendor's reading of one platform's questions, not proof that showing a rent produces more leads. So if someone tells you it does, ask for the data.
How to show a rent without boxing yourself in
- Use a range or "asking". "Asking $1.65 to $1.95 per SF per month" (example numbers) tells a tenant the neighbourhood without promising a deal.
- Always print the unit. Per square foot per year or per month. A tenant comparing two listings in different units will guess wrong, and one broker's guide notes both are used: a quote is "stated either annually ($/SF/YR) or monthly ($/SF/MO)" (Dean CRE, a tenant advisory brokerage, April 2026).
- Name the lease type. NNN, modified gross or full service. The same page says the figure "may represent base rent only" or "an all-in gross rate", and the extras on top of an NNN rate can run to several dollars a foot.
- For NNN, add the estimated extra charges. One brokerage's published example is "Lease Rate: $20.00 /SF NNN (Estimated NNN = $3.25/SF)" (NavPoint, a Denver brokerage, undated). A tenant can multiply that out.
- Date it. Put the month the rate was last checked on the listing or update the page when it changes. A rate with an availability date years old, like the one we found, tells a tenant to call first and trust nothing.
- Keep "call for details" for what is truly unknown, such as improvement allowances or a single large tenant's deal. Say what it depends on.
A short template that works on a property page:
Asking rate: $22 to $26 per SF per year, NNN (estimated NNN $6.50 per SF per year). Updated November 2026. Free rent and improvement allowances depend on term and tenant: call to talk through yours.
If you do not want to publish a number for a particular listing, a range, or a "starting at" rate, still beats a blank. The same reasoning applies to other trades: our contractor pricing post walks through why a range is safer than a quote.
Our own site
We do not list property for lease, so we have no rent to show. Our commercial property explorer, a fictional Sacramento office building, shows floors, suites and rooms, and not a single rate: no asking rent, no lease type, no price. For a demo that is honest, because the building is not real, but it is also a gap, since a real property page would need to show the rate. If we add a sample rate line, we will update this section.
How we did this, so you can check it
- The sample. The 21 Sacramento, Placer, El Dorado and Yolo County commercial brokerages with their own working website, built from the California Department of Real Estate licensee file. Their listings pages are the ones we used for the flyer PDF post. Seven have no listings on the site at all, one lists only past leasing projects, one has a listings page with nothing on it, and one still shows the website builder's sample text.
- The read. On November 9, 2026 we opened each firm's listings page in a real Chrome browser, scrolled it, and read the visible text. Listing widgets that load in a frame were opened by their own address. One site's 41 property pages were fetched and read as text. We counted a "rent shown" only where a dollar amount for the space appeared. "Contact broker", "see details", "negotiable" and "call for pricing" were counted as no rent.
- What we did not read. Two sites' listings sit in a listing platform widget that did not load for us (and one site's separate lease page does too), so they are not counted. One site's first 30 of 133 results were read. The brochure files on one site's property pages were not opened for rent, so a rent may be printed in a PDF.
- Limits. One day, one region, one browser. Listings turn over, so these counts will be out of date soon. The lease listings are only those we could read on five sites, so 76 is a count of the listings we saw, not of all lease listings or of brokerages.
- What we found no study of. In the searches we ran we found no independent study of whether a visible rent changes inquiries.
If you are updating your listings this week
- Open your lease listings on your phone and find the rent. If it is not there, that is what a tenant sees.
- Pick a range for each, in dollars per square foot, with the unit and the lease type.
- Add the date you last checked it.
- Keep one line for what the rate depends on.
- Tap-test the page: can someone decide to call after ten seconds?
If you want a property page that shows the rate, the size and your phone number first, in one place you own, that is the kind of page we build.
